Orion-system PT-Link II BACnet2 Bedienungsanleitung PDF herunterladen (Seite 11)

PT-Link II Interface

PT-Link II BACnet

Technical Guide

Figure 13: RUINET PT-Link Selection Menu

7.) On subsequent connections, a list of PT-Links that have been re-

cently connected may appear under the message “Recently connected

to FieldServers. Select the required PT-Link by typing the Number or

Letter in the left hand column. (Figure 13).

8.) Once connected, you will see the RUINET Main Menu (Figure 14).

Unless you need to make changes to the conﬁ g.csv ﬁ le (steps 7 through

15), you are now ready to send and receive ﬁ les to and from the PT-Link.

Figure 14: RUINET PT-Link II Main Menu

Figure 16: RUINET PT-Link Upload

10.) You will get conﬁ rmation that the upload is complete. Type <N>

to open the ﬁ le in Notepad.

WARNING: Only edit the conﬁ g.csv ﬁ le using Notepad. DO

NOT use Excel. Using Excel to edit the conﬁ g.csv ﬁ le will cor-

rupt its contents!

Figure 15: RUINET PT-Link Main Menu - Upload

9.) Type the letter <U> to upload the Conﬁ g ﬁ le (Figure 15), then type

<U> again (Figure 16) for Upload.

Changing the Conﬁ g.csv File

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 59 60

Keine Kommentare

Orion-system PT-Link II BACnet2 Bedienungsanleitung Seite 11