Orion-system VCC-X Controller Bedienungsanleitung PDF herunterladen (Seite 11)

OVERVIEW

VCC-X Controller Technical Guide

PART NO. PART DESCRIPTION ILLUSTRATION PAGE NO.

OE392-12 Modular System Manager SD

Includes: Modular System Manager SD with 4 Gigabyte SD card and 12 ft.

long pigtail cable assembly. Used to program and monitor all Orion

controllers. Designed for hollow core wall mounting. When System

Manager is to be mounted on a solid wall (concrete), you will also need

to order the solid wall mounting bracket below. Modular System Manager,

power supply, communication cables,

See VCC-X

Controller

Operator

Interfaces

Technical

Guide

EB101505 Solid Wall Mounting Bracket for Modular System Manager

Includes: 22 gauge galvanized sheet metal mounting bracket with mount-

ing holes and wire routing opening. Dimensions are 9.25″W x 8.00″H x

0.50″DP. The Wall Mounting Bracket provides wiring clearance between

the System Manager and the wall mounting surface when the System

Manager is to be mounted on a concrete or other solid wall surface. Not

for use with System Manager TS.

OE361-13 CommLink 5 Communications Interface

The CommLink 5 connects to your control system using a USB computer

connection to provide direct on-site communications with the control

system from a computer with the Prism 2 software installed. For remote

communications, see OE415-02 IP Module Kit.

Includes: CommLink 5, 6 ft. long USB cable, and 120/24 VAC power sup-

ply. Required on all networked systems or if direct computer or remote

computer connection is required. Connects to your computer’s USB 1.1

or 2.1 port. Prism 2 computer front-end software must be installed on the

direct connected or remote connected computer in order to communicate

with your system.

STATUS

See

CommLink

5 Technical

Guide

OE415-02

IP Module Kit - Internet/LAN Connection

Used for Internet or Local Area Network communications with the control

system. Field installs by plugging into the CommLink 5 circuit board and

provides an addressable Ethernet connection to the controls system from

any computer connected to your building’s LAN. It can also be conﬁ gured

to allow access to the control system from the Internet through your LAN if

your Ethernet ﬁ rewall is conﬁ gured for this option.

Includes: IP Link module, 10 ft. long Ethernet cable, and installation

instructions. Prism 2 computer front-end software must be installed on the

remote computer in order to dial-up and communicate with the controls

system.

See IP

Module

Technical

Guide

OE366

USB-Link 2 Kit

The USB-Link 2 is a pocket-sized communications interface used to

connect a laptop computer to your controls system for programming and

monitoring purposes, utilizing a modular cable to allow connection to the

service port connector on the controllers and a USB cable to connect to a

laptop computer.

Includes: USB-Link 2 for multiple or single loop systems, USB cable,

modular connection cable, two mini-DIN to terminal adapters, and Prism 2

software.

See USB-

Link 2

Technical

Guide

OE364-22 MiniLink Polling Device

Control enclosure is for indoor use only. Used with all Orion controllers

to provide network communications, zone voting, alarming, and tenant

logging capabilities. A MiniLink Polling Device is required on each loop

of a Networked system. Includes: MiniLink Polling Device mounted in

the EE000075-01 control enclosure. Control Enclosure cover is shown

removed in picture.

EPROM

RAM

CX2

CX3

CX4

YS101818P552

PROCESSORPBOARD

CX5

CX1

CX6

WDOG

PHILIPS

0-10V

4-20mA

THERM

R27

R31

GND

24VAC

TB1

C11

U12

LED 2

POWER

R25

R26

CX15

CX13

PROC.

DRIVER

LOOP

DRIVER

LOCAL LOOP

GND

AIN 2

AIN 1

+5V

TB2

OFF=0-5V

AIN2

AIN1

0-10V

4-20mA

THERM

SHLD

TB3

U15

LD5

LD6

U13

LED 1

RV1

VREF

CX2

U11

YS101900PMINILINK

POLLING

DEVICE

REV. 1

OFF

CX14

NETWORK

DRIVER

RN3

SHLD

TB4

U14

NETWORK

LOOP

ADD

R24

LD4

U10

RN2

SW1

R30

R29

R28

C10

CX6

CX1

CX7

Parts and Descriptions

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 119 120

Kommentare zu diesen Handbüchern

Keine Kommentare

Orion-system VCC-X Controller Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Orion-system VCC-X Controller