Orion-system VCC-X Controller Bedienungsanleitung PDF herunterladen (Seite 65)

VCC-X Operator Interface SD

RSMV CONFIGURATION

RSMV Conﬁ guration Screens

Modular Service Tool Instructions

No matter what screen or menu you’re in, press <CONFIGURA-

TION>. The Unit Selection Screen will appear, shown below, request-

ing that you enter the unit ID number.

Enter Unit Address

Then Press Enter

Selected Unit #_1

Press Down

Enter the correct unit ID number of the Controller that the RSMV

Module(s) are connected to and press <ENTER>. Once communica-

tion is established, the *00* message will go away.

NOTE: If the *00* remains, it indicates a communication

failure to the controller.

Then

press <>. You will then see the Conﬁ guration Selection

Screen below:

VCC-X CONFIGURATION

RSM CONFIGURATION

Select & Press Enter

Select RSM Conﬁ guration and then press <ENTER>. The following

screen will appear:

Select one of the options and press <ENTER>.

SETUP RSM STAGING

COMPRESSOR SETTINGS

System Manager SD Instructions

From any Main screen, press <SETPOINTS>. The screen below

will appear because this option requires passcode clearance. Only

a Level 2 passcode can change setpoints.

THIS ACTION REQUIRES

PASSCODE CLEARANCE

Enter Passcode: XXXX

If the correct passcode was entered, the Unit Selection Screen will

be displayed.

Enter Unit Address

Then Press Enter

Selected Unit #_1

Press Down

Enter the correct unit ID number of the Controller that the RSMV

Module(s) are connected to and then press

<ENTER>. Once com-

munication is established, the *00* message will go away. Then

press <>. press <ENTER>. Once communication is established,

the *00* message will go away. Then

press <>.

NOTE: If the *00* remains, it indicates a communication

failure to the controller.

The following screen will be displayed:

Change Setpoints

Configure Unit

Save/Copy/Restore

Scroll down to the ‘Conﬁ gure Unit’ option and press <ENTER>.

VCC-X CONFIGURATION

RSM CONFIGURATION

Select & Press Enter

Select RSM Conﬁ guration and then press <ENTER>. The following

screen will appear:

SETUP RSM STAGING

COMPRESSOR SETTINGS

Select one of the options and press <ENTER>.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare

Orion-system VCC-X Controller Bedienungsanleitung Seite 65

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Orion-system VCC-X Controller