Orion-system VCC-X Controller Bedienungsanleitung PDF herunterladen (Seite 84)

APPENDIX A - SAVE, LOAD, COPY SETPOINTS

VCC-X Operator Interface SD

Copy Setpoints - Network Mode

To copy a saved setpoints ﬁ le to other controllers on the network

do the following:

From the Save Setpoints Screen shown below:

Save Setpoints

Press Enter To Save

Press <> once to access the Copy Setpoints Screen shown below.

Copy Setpoints

From Loop 1

From Unit 2

Press Enter to Copy

In the ‘From Loop’ ﬁ eld, enter the Loop of the controller you want

to copy the setpoints from. In this example it is ‘1’. Then press

<ENTER>.

In the ‘From Unit’ ﬁ eld, enter the Unit ID of the controller you

want to copy the setpoints from. In this example it is ‘2’. Then

press

<ENTER>.

Now your cursor will be on the last line, and you can

press <ENTER>

once more to copy the setpoint ﬁ le from unit 102 to unit 103.

You will receive a conﬁ rmation that the copy was successful.

Save & Copy Setpoints - Stand-Alone

Mode

The instructions for Stand-Alone Mode are exactly the same as

Network Mode, except that there is no need to enter a Loop number

in the Unit ID number ﬁ eld and in the Copy Setpoints Screen, enter

a zero in the ‘From Loop’ ﬁ eld.

Restore Setpoints - Network or

Stand-Alone Mode

The Restore Setpoints feature is used to reload a saved setpoints ﬁ le

from one controller back to itself. This could be useful if setpoints

or conﬁ gurations were changed and need to be reset.

You can perform this function on a networked system; however, the

Modular Service Tool needs to be directly connected to the controller

you wish to restore previously saved setpoints to.

From the Save Setpoints Screen shown below:

Save Setpoints

Press Enter To Save

Press <> four times to access the Restore Setpoints Screen shown

below.

Restore Setpoints

Press Enter to Load

Press <ENTER>. This will reload the setpoints from the saved ﬁ le.

You will receive conﬁ rmation that the setpoints were loaded suc-

cessfully.

Copying & Restoring Previously Saved Setpoints

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare

Orion-system VCC-X Controller Bedienungsanleitung Seite 84

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Orion-system VCC-X Controller