Orion-system PT-Link II LON Bedienungsanleitung PDF herunterladen (Seite 10)

PT-Link II LON

Technical Guide

PT-Link II Interface

Figure 13: RUINET PT-Link II Upload

8.) You will get conﬁ rmation that the upload is complete. Type <N>

to open the conﬁ g.csv ﬁ le in Notepad.

7.) Type the letter <U> to upload the Conﬁ g ﬁ le (Figure 12), then type

<U> again (Figure 13) for Upload.

Changing the Conﬁ g.csv File

Figure 12: RUINET PT-Link II Main Menu - Upload

WARNING: Only edit the conﬁ g.csv ﬁ le using Notepad. DO

NOT use Excel. Using Excel to edit the conﬁ g.csv ﬁ le will cor-

rupt its contents!

9.) Follow the directions under “Explicit and Implicit Addressing”

on pages 12 & 13 to make changes to the conﬁ g.csv ﬁ le.

NOTE: The PT-Link II contains an external interface ﬁ le other-

wise called an XIF ﬁ le (fserver.xif). The XIF ﬁ le includes

information such as SNVT names and LON network

information. This ﬁ le can be uploaded for use with LON

programming software. When uploaded, these ﬁ les can be

located in the same directory that the RUINET executable

ﬁ le is stored and run from. Be sure when uploading that

the correct ﬁ le is speciﬁ ed in the upload window. Refer

to Figures 12 & 13 below for screen details. Refer to

Appendix B, page 25 for details on uploading XIF ﬁ les.

10.) Once the changes are made to the conﬁ g.csv ﬁ le, click <File>

in the upper left and then click <Save>. Now close the ﬁ le and

return to the RUINET Main Menu.

11.) From the RUINET Main Menu, type <D> to Download the new

conﬁ g.csv ﬁ le to the FieldServer (Figure 14).

Figure 14: Download new Conﬁ g.csv ﬁ le

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 59 60

Keine Kommentare

Orion-system PT-Link II LON Bedienungsanleitung Seite 10